Fiberbuilt Grass Series Practice Station

Fiberbuilt Grass Series Practice Station

The ultimate game improvement mat system, the Fiberbuilt Grass Series Practice Station pairs our oval-shaped Flight Deck hitting mat with a high-traction stance mat, featuring an integrated ball tray and various training components. The Flight Deck is crafted with authentic Fiberbuilt Grass for true-to-life impact conditions and ball flight, while the hitting surface is level with the stance mat for seamless transitions. Molded alignment guides on the stance mat, along with slots for included rods, assist in perfecting ball position, alignment, and swing path, while helping to prevent swaying during the swing.

The large, stable stance mat is easy to assemble and break down, providing a versatile solution for efficient practice both indoors and outdoors.

• Made of genuine Fiberbuilt Grass, the Flight Deck comes with our 300,000-shot guarantee 
  
• Flight Deck hitting surface sits in the high-traction stance mat for level hitting and stability
• Launch monitor-tested to feel and perform like fairway grass, and avoid joint pain from "turf shock"
• Integrated alignment guides and oval shape for clubhead path
• Knock-down design sets up and breaks down in under a minute
• Can be used with any type of club, from woods to wedges
• Indoor or outdoor use
• Made from recycled materials
• Includes: Flight Deck hitting mat, rubber stance mat, 2 alignment rods, Adjustable Tee for practicing varying height tee shots
• The finished dimensions of this mat are 61"x 40"x 2"
  

For optimum performance, you should install your golf mat on a firm and level surface like concrete, packed gravel, asphalt or a solid deck. It should not be installed on bare ground or grass.

 

 

Instructional Videos

Want to learn how the Fiberbuilt Grass Series Practice Station can be used as a learning tool to improve your game? Check out the INSTRUCTIONAL VIDEO SERIES.

IMPROVING YOUR GAME WITH THE PRACTICE STATION

Fiberbuilt's Practice Station is one of the smartest teaching tools you can use. But, you might ask, "Isn't it just a mat?" The answer is that this is no ordinary mat. It integrates a host of training elements from slots to accommodate rods for alignment, ball position and swing path to grooves for hand path and holes to stand rods to help prevent swaying. It's a full-blown practice environment that can make the difference in your game, and the following video series is created to help you get the most out of it.

 

Video #1: Assembly

 

Video #2: Alignment

 

Video #3: Stance Width & Ball Position

 

Video #4: Backswing Shoulder Turn

 

Video #5: Shoulder Turn In Your Downswing

 

Video #6: Hitting a Fade

 

Video #7: Hitting a Draw

 

Video #8: Low Trajectory

 

Video #9: High Trajectory

 

Video #10: Hand Path

 

Video #11: Clubhead Path

 

Video #12: Clubhead Path

 

Video #13: Stop Hitting Fat and Thin

 

Video #14: Shallow the Club

 

Product Care

Product Care

Regular maintenance of your Fiberbuilt Golf Mat System will ensure maximum life for the components.

 

Hitting Surface Panels

Cleaning: Fiberbuilt Grass and Player Preferred Series hitting surfaces should be pressure washed once per year to remove any sand or dirt that has accumulated in the fibers.

Maintenance: Regularly changing the ball position for hitting on the 2'x4' Player Preferred hitting panels will minimize the wear of the panels. These panels can also be rotated 180º to increase their lives.

 

Fiberbuilt Grass panels can also be rotated 180º as wear emerges on one side. Additionally, these panels consist of 4 individual squares that can be rotated for maximum life. Below is a photo of the rotation pattern options. 

When the middle panel(s) need replacing, remove them from the hitting surface, bring the outside panels to the center and replace the outside panels with 2 new ones OR as shown below, when you have two hitting surfaces take the 2 end panels from the panel ‘B’ 4-pack and use them to replace the worn inner panels just removed from panel ‘A’.

 

 

To rotate the panels, remove the L-channel brackets and separate the four panels that make up the driving surface. Rotate the panels so that you have a ‘new’ panel in place of where the rubber tees would be placed. Once the panels have been rotated, to re-assemble the panel components evenly and securely us a rubber hammer and “jig” to fasten the components back in place. It is important that all four components are level to recreate the smooth hitting surface.

Once the four panels have been re-assembled you can attach the “L channel”. You will need to shift the ‘L channel” slightly, drill the self-taping Robertson #2 screws into the bottom of the panel. Do not reuse the same holes. 

 

Stance Mats

Cleaning: The Performance Turf stance mats should be removed from the rubber foundation to be pressure washed every few months. Sand and dirt collects in the nylon fibers of the turf stance mat and will deteriorate and damage the nylon if it is not washed regularly.

Maintenance: The stance mat is square to enable you to rotate the mat to balance wear. If you have rubber stance mats, sweeping and pressure washing with water will keep them clean. Never apply any cleaning or shining agents to the stance mat.

 

Rubber Foundation

Maintenance: The rubber foundation should be swept out occasionally. The frame may also be pressure washed. You will need to ensure that the drainage holes do not plug up with sand and dirt. You may also consider drilling additional holes into the rubber foundation to accelerate the water drainage.To keep your rubber foundation looking clean and new, you can apply tire cleaner (like Armor All) to the outside edges only.

 

Ball Trays

Maintenance: Ball Trays should be swept and cleaned occasionally and may also be pressure washed. To keep ball trays looking new, apply a tire cleaner (like Armor All) to the ball trays.

 

Off-Season Storage

Stack the hitting surface vertically against a wall and stack only 5-8 deep. Do NOT stack the hitting surface horizontally on top of each other; this will flatten the nylon fibers. The turf stance mats and the rubber foundations can be stacked on each other horizontally. Do not mix the stack.

 

Parts & Assembly Information

Parts & Assembly information

Parts & Assembly information for the Fiberbuilt Grass Series Practice Station can be found HERE.