Fiberbuilt Player Preferred Series Combo Golf Mat - Double Hitting

Fiberbuilt Player Preferred Series Combo Golf Mat - Double Hitting

Player Preferred Series Double-Hitting Combo Mats deliver unmatched performance for your simulator or training studio, designed to accommodate both right- and left-handed golfers. Crafted for the advanced player, these mats combine Fiberbuilt's exclusive Pure Impact Turf hitting surface with a professional-quality putting green, offering a premium mat that provides a complete practice experience for your simulator, backyard, or golf academy.

The Pure Impact Turf hitting surface is launch monitor-tested to provide an accurate simulation of real fairway conditions. Featuring a proprietary Vibration Absorption Layer that reduces 94.7% of clubhead vibration, it offers the true feel and sound preferred by serious players, allowing for a confident, aggressive swing.

Fiberbuilt’s Putting Turf, with its embossed rubber backing, eliminates creases and curling, ensuring a true roll right out of the box. As recommended by leading fitters and instructors, the turf boasts a 9 stimpmeter rating and offers realistic chip shot check and roll.

This mat is built for both indoor and outdoor use, with a modular rubber base that offers exceptional shock absorption and stability for a secure practice surface.

The Friction-Fit Tee Holders slot into the hitting panel’s holes, allowing you to use real tees for every tee shot. (Note: Fiberbuilt Grass Series Adjustable Tees are not compatible with this system.)

Fiberbuilt's Player Preferred Combo Mats assemble in just a few simple, tool-free steps, and all mats are 2" tall. The double-hitting design features spacer areas, perfect for ball trays or face-on optical launch monitors like Foresight, SkyTrak, and Ernest Sports.

Every Player Preferred Series Center-Hitting Tee Box Combo Mat Includes:

• 2 Pure Impact Turf hitting panels  (2' x 4')
• Stance & putting turf with 2 cup holes
  
• 2 metal putting cups
• Shock absorbing rubber foundation
• Friction-fit tee holders (2)

For optimum performance, you should install your Combo Mat on a firm and level surface like concrete, packed gravel, asphalt or a solid deck. It should not be installed on bare ground or grass.

You can customize your Combo Mat for almost any size and a variety of hole placements. Call 412-567-4390 and speak to one of our design consultants for more information.

Product Care

Product Care

Regular maintenance of your Fiberbuilt Golf Mat System will ensure maximum life for the components.

Hitting Surface Panels

Cleaning: Fiberbuilt Grass and Player Preferred Series hitting surfaces should be pressure washed once per year to remove any sand or dirt that has accumulated in the fibers.

Maintenance: Regularly changing the ball position for hitting on the 2'x4' Player Preferred hitting panels will minimize the wear of the panels. These panels can also be rotated 180º to increase their lives.

Fiberbuilt Grass panels can also be rotated 180º as wear emerges on one side. Additionally, these panels consist of 4 individual squares that can be rotated for maximum life. Below is a photo of the rotation pattern options. 

When the middle panel(s) need replacing, remove them from the hitting surface, bring the outside panels to the center and replace the outside panels with 2 new ones OR as shown below, when you have two hitting surfaces take the 2 end panels from the panel ‘B’ 4-pack and use them to replace the worn inner panels just removed from panel ‘A’.

To rotate the panels, remove the L-channel brackets and separate the four panels that make up the driving surface. Rotate the panels so that you have a ‘new’ panel in place of where the rubber tees would be placed. Once the panels have been rotated, to re-assemble the panel components evenly and securely us a rubber hammer and “jig” to fasten the components back in place. It is important that all four components are level to recreate the smooth hitting surface.

Once the four panels have been re-assembled you can attach the “L channel”. You will need to shift the ‘L channel” slightly, drill the self-taping Robertson #2 screws into the bottom of the panel. Do not reuse the same holes. 

Stance Mats

Cleaning: The Performance Turf stance mats should be removed from the rubber foundation to be pressure washed every few months. Sand and dirt collects in the nylon fibers of the turf stance mat and will deteriorate and damage the nylon if it is not washed regularly.

Maintenance: The stance mat is square to enable you to rotate the mat to balance wear. If you have rubber stance mats, sweeping and pressure washing with water will keep them clean. Never apply any cleaning or shining agents to the stance mat.

Rubber Foundation

Maintenance: The rubber foundation should be swept out occasionally. The frame may also be pressure washed. You will need to ensure that the drainage holes do not plug up with sand and dirt. You may also consider drilling additional holes into the rubber foundation to accelerate the water drainage.To keep your rubber foundation looking clean and new, you can apply tire cleaner (like Armor All) to the outside edges only.

Ball Trays

Maintenance: Ball Trays should be swept and cleaned occasionally and may also be pressure washed. To keep ball trays looking new, apply a tire cleaner (like Armor All) to the ball trays.

Off-Season Storage

Stack the hitting surface vertically against a wall and stack only 5-8 deep. Do NOT stack the hitting surface horizontally on top of each other; this will flatten the nylon fibers. The turf stance mats and the rubber foundations can be stacked on each other horizontally. Do not mix the stack.

Parts & Assembly Information

Parts & Assembly information for Player Preferred Series Double-Hitting Combo Mats can be found here:

12' x 10'

12' x 12'