|
Note:Two styles are shipped randomly.
|
| Description |
| Designed for printing textiles and other materials may be used on food, t-shirts, mouse pads, puzzles, ceramic tiles, |
| and other flat surfaces items by using the flex, flocking, transfer printing paper, sublimation etc. |
| The press is equipped with a manual override, a digital display, and a sound signal at the end of work. |
|
Parameters
|
| size |
15"*15"(38*38cm) |
| Voltage |
110V |
| Time range |
0s-999s |
| Max temp |
0-250℃(482℉） |
| Package size |
27.56*18.11*16.34 inch (70*46*41.5cm) |
| Gross weight |
60.9LBS(27.7KG) |
|
| Using method |
| 1.set pressure |
| Adjust pressure at the top of the tray in a clockwise direction to increase pressure and in the opposite direction to decrease by turning the knob. |
|
| 2.set temperature&time |
| Press on the on / off switch located on the side of the heat press to be energized. |
| Press once on the "OK", screen show "P-1" on the display. Press “▼”or “▲” to the desired |
| temperature. |
|
|
| Press once again on "OK", screen show "P-2" on the display. |
| Press “▼”or “▲” to the desired time. |
|
|
| Press “OK” again after finish all setting to come out setting mode. |
| Put objects when the machine has reached the desired temperature, close heating plates, waiting time. |
| When times up, machine will ringing, then lift heating plates, take out printing items |
|
|
|
Please comply with these instructions
|
| 1. Do not put the wire on heating plates cover. |
| 2. Do not touch heating plates when heating up. Caution: Risk of burns. |
| 3. Do not open the machine box and make changes to the device. |
| 4. Do not allow liquid or metal objects inside the hot press. |
| 5.Make sure the machine is connected with a plug connected to the mass. |
| 6.Power off the machine when finish using. |
